Electrical type of high temperature sterilization steamer

1. The body of machine is made of SUS304, which has good thermal insulation effect, long service life and convenient cleaning and maintenance.
2. The door panel is equipped with perspective strengthened glass, which can check the internal condition of the steamer.
3. Patented adjustable tight handle can quickly and easily open and close the steamer door, and you can also DIY adjust the tight handle to the best tightness.
4. The patented adjustable tight handle can be effectively fixed to the groove of the fastening pad, and the handle will not be loosened due to the gas pressure inside the steamer. When the fastening pad is worn out and cannot be used, it can also DIY replace parts.
5. The base of the adjustable tight handle make a full row, which is more durable for many years of open door use.
6. The sword-shaped adjustable hinge on the side of the door can be DIY adjusted to the best air tightness.
7. Equipped with dry and wet electric heating tubes. The internal temperature of the machine can reach up to about 135°C.
8. There are fans in the machine to make the hot air inside the machine circulate and the internal temperature is heat well-distributed.
9. Equipped with automatic water supply function, there is no need to worry about making up water and getting things done more efficiently.
10. Equipped with a safety device that will automatically cut off power When the water level is abnormal(means the water level is insufficient or too high), and the buzzer is going to intermittent beep warning at the same time.
11. Easy to operation the electronic control panel which with temperature controller and timer. In terms of temperature, you can preset fixed temperature or keep heating up. Time can be preset also, and the buzzer is going to alarm when the set time is reached.
12. You can purchase the electronic parts which used in the electronic control panel(electronic control box) locally when you need to replace the parts. Once a part failure, it is only necessary to replace the part, and the entire panel doesn't need to be replaced at the same time, which can save unnecessary costs.
13. When high temperature sterilization, the rack trolley which matched with this model of high temperature sterilization steamer just push the upper of the rack trolley into the high temperature sterilization steamer, which is very time-saving and efficient.

Size in mm、Quantity in pcs

Product are widely used in things that can be steamed,

e.g. the following categories:

Iron canned food, glass canned food (XO sauce, jam, etc...)